| Antenna Quick Disconnects |
| |
The K-1A model has an internal locking mechanism. The K-1A can be used with any of our antennas up to 5ft (1.5m) long and with all accessories too. The actual installed size is 2.9" (74mm) high x 0.600" (15mm) diameter. The locking pin and the spring are made from stainless steel. (K1A) |
|
|
|
Heavy
Duty, 100% Stainless quick disconnect from Hustler. They are
the standard 3/8"-24
threads and feature a 2 year warranty. Just press and twist and
your antenna releases. (QD2) |
|
| Mirror Mount Brackets |
| |
The
brackets are made from cold rolled steel and are finished with
chrome plating. The K-6 does not include the antenna stud. The
actual size of the bracket is 2.25" (57mm) wide by 2.9" (74mm)
high. With the stud in place, the height is 4.2" (107mm). They
protrude outward from the vertical surface 1.9" (48mm). (K6) |
|
|
| |
Standard
duty aluminum bracket with stud. Mounts on the mirror
arms horizontal or vertical bar (BRK4B) |
|
|
| |
New
Item
|
|
Antenna
bracket for new style mirror arms on Freight Liner & International
Trucks.
For - 1 1/4 inch diameter mirror arms (BRK 4B LG) |
|
|
New
Item |
|
Antenna
bracket for new style mirror arms on Freight Liner & International
Trucks.
For -
1 1/8 inch diameter mirror arms. (BRK 4B LG-2) |
|
| |
The clamp may be omitted which will allow the angle bracket to be
used as a side bracket on any flat vertical surface, The SS-64A model
has our world famous K-4A stud mount with screw on coaxial termination.
All models come complete with stainless steel mounting hardware. (SS64A) |
|
|
| |
The brackets
are made from cold rolled steel and are finished with chrome
plating. The actual size of the bracket is 2.25"
(57mm) wide by 2.9" (74mm) high. With the stud in place, the
height is 4.2" (107mm). They protrude outward from the vertical
surface 1.9" (48mm). Can be mounted on mirror arm horizontally
or vertically. (K64A) |
|
|
|
Horizontal gumdrop mirror mounts. Oversized metal, ABS plastic gumdrop stud. Extra heavy duty non-corrosive aircraft aluminum for long life. Standard 3/8" x 24 threads with SO-239 connectors for use with plug-to-plug hook-ups. Set includes gumdrop stud and mirror mount. Available in (Red: 305-701) (Black: 305-700) (White 305-702) |
|
| Antenna Mount Springs |
|
These
springs are made from long lasting, top grade electro-polished
stainless steel. The upper and lower inserts are made of chrome-plated
machine brass and have standard 3/8"-24 threads to fit all Firestik
antennas, mounts and accessories. Stands 3.5" high (SS3M) |
|
|
|
These
springs are made from long lasting, top grade electro-polished
stainless steel. The upper and lower inserts are made of chrome-plated
machine brass and have standard 3/8"-24 threads to fit all Firestik
antennas, mounts and accessories. Stands 3.5" high (SS3H) |
|
|
|
Heavy
duty barrel type spring, 100% solid stainless steel, 3/8"-24
threads, made by Hustler Stands 5"
tall (SSM3) |
|
|
|
Heavy
duty barrel type spring, Quality chrome plated steel, 3/8"-24
threads (A30) |
|
| Hole Plugs |
|
If you have
an unused hole from a previous antenna use one
of our snap in hole plugs to seal it up. The HPA-S (small) hole
plug package holds 2 plugs for 3/8" holes and 2 plugs
for 1/2" holes (HPAS) |
|
|
| Antenna
Ball Mount |
| |
Ball
mounts are the most versatile mounts made for antenna mounting.
The split ball design allows the mount to be installed on any vertical
or horizontal surface, regardless of the angle of the plane, while
allowing the antenna to remain in the desired vertical position.
The ball locks into place and will not allow the antenna to slip.
(JBC985) Requires
coaxial cables for ring-terminal type end lugs |
|
| Antenna Bracket Mounting Bar |
|
6" long
stainless steel mounting bar for new series Volvo trucks
(PROSSR50) |
|
| Antenna
Magnetic Mounts |
No Photo Available
at this time |
(PROPCT M5) Pro Com T bar
Heavy Duty mag mount. Uses three 5" magnets with an antenna
stud in the center. |
|
|
| |
( PROPCT M4) Pro Com T bar
Heavy Duty mag mount. Uses four 5" magnets tied together with
steel bars. Includes an antenna stud in the center and coax. Measures
12" by 12"
|
|
|
| |
Bandit L Pad
triangle plate Heavy Duty mag mount. Uses three 5" magnets
with an antenna stud in the center. Sides equal 12" (BANDLPAD) |
|
|
